Product specifications

Material properties

Item/Material properties	PP Polypropylene	N Nylon 66 with glass fiber	AL Aluminum
Bending strength	36N/m²	240N/m²	-
Impact strength	Non-destructive	Non-destructive	-
Compressive strength	60N/m²	200N/m²	600N/m²
Tensile strength	27N/m²	180N/m²	180N/m²
Continuous service temperature	-30℃～100℃	-40℃～-120℃	400℃以下

Assembly

Clamp tightening torque Nm (maximum tightening torque)

Series/Material property	PP	N	AL
30	12	20	30
40	12	20	30
60	15	25	35
90	30	40	55
120	45	55	120
160	90	-	-
200	150	-	-
260	250	-	-
390	300	-	-

Size table (Plastic & aluminum)

Series	Applied pipe diameter				Dimensions								Mounting bolt
	Nominal diameter			Diameter
	(A)	(B)	outside diameter	mm	P	A	B1	C	T1	T2	H	Hο
30	6	1/8	10.5	6,8,10 12,15 16,18	33	55	30	73	8	12	52	28	M10×45
	8	1/4	13.8
	10	3/8	17.3
40	15	1/2	21.7	20,25,28	45	70	30	85	8	12	68	36	M10×60
	20	3/4	27.2
60	25	1	34.0	30,35 38,42	60	85	30	100	8	12	80	42	M10×70
	32	1 1/4	42.7
90	40	1 1/2	48.6	43,50	90	115	45	150	10	16	117	61	M12×110
	50	2	60.5
120	65	2 1/2	76.3	-	122	150	60	200	10	16	146	76	M16×140
	80	3	89.1
160	90	3 1/2	101.6	-	168	205	80	270	15	19	204	104	M20×190
	100	4	114.3
200	125	5	139.8	-	205	250	90	310	15	19	234	119	M24×230
	150	6	165.2
260	175	7	190.7	-	265	320	122	380	25	25	320	160	M30×310
	200	8	216.3
390	225	9	241.8	-	395	466	160	520	30	30	475	235	M33×460
	250	10	267.4
	300	12	318.5

Nylon 66 and aluminum support range

Note: Nylon 66 and aluminum clamp support range is 6A to 80A.